BD Rebuilder Beta - Bug Reports Only

[gonca]

@wakko709
Do you have coreAVC or any other AVC codecs installed? Last time I saw a similar message was when I was using BD_RB as a stress tester to check my O.C. The message I recall seeing, if I remember correctly, said "x264 or x264.exe" has stopped working. Note that it referred to x264 not h264.

[AmigaFuture]

Originally Posted by jdobbs

Telecining was just a way to convert films (which originate at 24fps) to NTSC video (which is played at 30fps [actually 29.97fps because of timing involved related to blanking])

That's a bit more clear than a lot of guides have seen. Some of it I already got, but other parts..not. Thank you for that share.

I now understand why I was seeing a slight "jerky" video with "The Mentalist" S1 D1 Ep1.. In Alternate MP4 (iPad) AAC...the DVD Episode isn't being rerendered to 23.976. None of the Hidden Options I've used or combinations are creating a 23.976 MP4. To verify it's possible I used HandBrake to create a smooth 23.976 Detelecined MP4. Is there something broken in that Alternate Output, perhaps?

Oh, I meant to let you know is seems it Is possible to have PGSs within an MP4, it's just that iPad (2)'s software doesn't know how to deal with it so it display...only. No turning it off. Hah! A recent version of HandBrake created the file. I saw PGS was selectable, so I played.


Do you really think 0 is ODD??
PULLDOWN_720=n n = 0/1 - 0=ODD (default) - if set to "1", use pulldown for 29.97->59.94 conversion on 720p

[jdobbs]

PULLDOWN_720=n n = 0/1 - 0=ODD (default) - if set to "1", use pulldown for 29.97->59.94 conversion on 720p

One key off in the typing, is seems.

[lauguru]

Hello
is there any way to activate with bdrebuilder ati stream? or only works cuda nvidia?

[jdobbs]

Originally Posted by lauguru

Hello
is there any way to activate with bdrebuilder ati stream? or only works cuda nvidia?

There's no support for ATI stream as yet. ATI, I believe, does support OpenCL, however, and that can be enabled via X264 with this:

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

[lauguru]

Originally Posted by jdobbs

There's no support for ATI stream as yet. ATI, I believe, does support OpenCL, however, and that can be enabled via X264 with this:

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

I mean, you should uncheck "use lavf internal x264 for decodind" in the setup menu and

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

in bdrebuilder.ini
correct?

[jdobbs]

Originally Posted by lauguru

I mean, keep internal use lavf for decodind x264 in the setup menu and add

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

in bdrebuilder.ini
correct?

I'm not sure LAVF selection is required. Someone else may be able to give more info on its internal workings. But I can say that turning it on with Directshow enabled is actually much slower than Directshow alone when I try it with my Nvidia card.

[lauguru]

Originally Posted by jdobbs

I'm not sure LAVF selection is required. Someone else may be able to give more info on its internal workings. But I can say that turning it on with Directshow enabled is actually much slower than Directshow alone when I try it with my Nvidia card.

true! works now, turning to what I've said
many thanks jdobbs

[lauguru]

I just checked, that the first pass has run ati stream, but the 2 pass I see that the graphics card does not process, single processor

which could be the problem?

[Options]
VERSION=0.44.0.14
MODE=0
TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl
THREADS=12
DVD_IMPORT_THRESHOLD=5
FORCE_ENCODE=1
DEFAULT_LANG=spa
B_PYRAMID=1
MIN_M2TS_SIZE=1
MIN_PLAYLIST_MINS=1
WEIGHTP =1
DTSX_ENABLE=1
AUTO_BIAS=3
BLANK_THRESHOLD=1
ENABLE_TEST=1
ONEPASS_ENCODING=0
MULTIPROCESS=1
AUTO_QUALITY=0
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=1
RESIZE_1080=0
DEINTERLACE=1
DEINTERLACER_TYPE=3
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24900
ENABLE_BLANKING=1
TARGET_SIZE=24900
OUTPUT_3D=0
PRIORITY_CLASS=1
RESIZE_1440=0
ENCODE_QUALITY=4
MOVIEONLY_TYPE=29
ALTCRF=20
ALT_TARGET=28000
ALTMETHOD=2
ALTAUTOCROP=1
RESIZE_720=0
NEROAAC=0

[Valdy]

Hi!

Thank you for you work. I like the simplicity of your application, but unfortunately most of the times i can't use it. I have a sound delaying problem, which i don't know what causes.
The inspect exe says everything is OK and i use the recommended ffdshow version.
Last time i tried (version 0.44.14), i picked the high quality setting CRF, and targeted BD25 option. There were no audio reencode, i kept the HD audio too.

What do you suggest?

Thanks!

[tiamat911]

@jdobbs

For the past few versions of BD Rebuilder, I haven't been able to do BD to DVD conversions when I include subtitles. When no subtitles are present, everything works fine. I've tried it with 4-5 different BDs and I always get the same error at the very end. This is what the log looks like. This was for 'James and the Giant Peach' but I also got the same behabior a few days ago with 'Silver Linings Playbook'.

[06-22-13] BD Rebuilder v0.44.14 (beta)
[11:41:45] Source: JAMESANDTHEGIANTPEACH_00100
- Input BD size: 24,21 GB
- Approximate total content: [01:19:25.051]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-5, 720x480/576, AC3 Audio
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=448
[11:41:46] PHASE ONE, Encoding
- [11:41:46] Processing: VID_00066 (1 of 1)
- [11:41:46] Extracting A/V streams [VID_00066]
- [12:00:53] Reencoding video [VID_00066]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 114 247 frames
- Bitrate: 6 687 Kbs
- [12:00:53] Reencoding: VID_00066
- [13:05:46] Video Encode complete
- [13:05:46] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (fra): Reencoding audio to AC3...
[13:09:42]PHASE ONE complete
[13:09:42]PHASE TWO - Rebuild Started
- [13:09:42] Building ALTERNATE OUTPUT Structure
- [13:09:42] Converting 3 subtitles to DVD format.
- [13:10:50] Starting MPLEX.
- [13:12:58] Multiplexing 3 subtitles into stream.
- WARNING: Failed to integrate Subtitle_01
- WARNING: Failed to integrate Subtitle_02
- WARNING: Failed to integrate Subtitle_03
- [13:13:06] Building DVD File Structure.
- ERROR in attempt to create DVD structure (DVDAUTHOR)
[13:13:06] - Failed to REBUILD

The Inspect tool output looks fine too :

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.44.0.14, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- WAVI: Ok
- TSMUXER: Ok

Any idea ? Thanks !!

[jdobbs]

Originally Posted by Valdy

Hi!

Thank you for you work. I like the simplicity of your application, but unfortunately most of the times i can't use it. I have a sound delaying problem, which i don't know what causes.
The inspect exe says everything is OK and i use the recommended ffdshow version.
Last time i tried (version 0.44.14), i picked the high quality setting CRF, and targeted BD25 option. There were no audio reencode, i kept the HD audio too.

What do you suggest?

Thanks!

Check for CODEC packs and other CODEC installations. If they are there, remove them. They often intercept or interfere with encoding and are almost always the cause of this type of issue. It's helpful if you post a log when you report a problem. It's hard to "just guess" what you're experiencing and what settings are in use.

[jdobbs]

Originally Posted by tiamat911

@jdobbs

For the past few versions of BD Rebuilder, I haven't been able to do BD to DVD conversions when I include subtitles. When no subtitles are present, everything works fine. I've tried it with 4-5 different BDs and I always get the same error at the very end. This is what the log looks like. This was for 'James and the Giant Peach' but I also got the same behabior a few days ago with 'Silver Linings Playbook'.

[06-22-13] BD Rebuilder v0.44.14 (beta)
[11:41:45] Source: JAMESANDTHEGIANTPEACH_00100
- Input BD size: 24,21 GB
- Approximate total content: [01:19:25.051]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-5, 720x480/576, AC3 Audio
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=448
[11:41:46] PHASE ONE, Encoding
- [11:41:46] Processing: VID_00066 (1 of 1)
- [11:41:46] Extracting A/V streams [VID_00066]
- [12:00:53] Reencoding video [VID_00066]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 114 247 frames
- Bitrate: 6 687 Kbs
- [12:00:53] Reencoding: VID_00066
- [13:05:46] Video Encode complete
- [13:05:46] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (fra): Reencoding audio to AC3...
[13:09:42]PHASE ONE complete
[13:09:42]PHASE TWO - Rebuild Started
- [13:09:42] Building ALTERNATE OUTPUT Structure
- [13:09:42] Converting 3 subtitles to DVD format.
- [13:10:50] Starting MPLEX.
- [13:12:58] Multiplexing 3 subtitles into stream.
- WARNING: Failed to integrate Subtitle_01
- WARNING: Failed to integrate Subtitle_02
- WARNING: Failed to integrate Subtitle_03
- [13:13:06] Building DVD File Structure.
- ERROR in attempt to create DVD structure (DVDAUTHOR)
[13:13:06] - Failed to REBUILD

The Inspect tool output looks fine too :

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.44.0.14, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- WAVI: Ok
- TSMUXER: Ok

Any idea ? Thanks !!

I'll do some testing and see what I can find.

[Valdy]

Originally Posted by jdobbs

Check for CODEC packs and other CODEC installations. If they are there, remove them. They often intercept or interfere with encoding and are almost always the cause of this type of issue. It's helpful if you post a log when you report a problem. It's hard to "just guess" what you're experiencing and what settings are in use.

I don't use codec packs. I use mpc-hc + madvr + lav filters for movies, and nothing else. Ofcourse avisynth, haali and ffdshow are intalled too.
My problem is more precisely is that all of the soundtracks are delayed by a couple of seconds.

What kind of log would be helpful?
The one that is displayed by bd_rebuilder at the end of the job?

inspect.exe:

- Windows Version: 6.2 [9200]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.11.96.14], Ok
- FFDSHOW: [3326], Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- BD Rebuilder v0.44.0.14, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- WAVI: Ok
- TSMUXER: Ok

[lauguru]

jdobbs

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

is normal in the first pass OpenCL work properly, and the 2nd pass not see it working?

that could wrong? or command must be added to the 2 pass?

[Guest]

Originally Posted by Valdy

F:\ZSOLTI\ENTER.THE.DRAGON.1973.BLU-RAY.AVC.DTS-HD.HUN.REMUX

This kind of material cannot be discussed here, per forum rule 6. Further violations can lead to strikes and suspension.

@all

No help to be given on this. Thank you.

[Valdy]

Originally Posted by neuron2

This kind of material cannot be discussed here, per forum rule 6. Further violations can lead to strikes and suspension.

@all

No help to be given on this. Thank you.

Sorry i wasn't aware of this. I edited it out.

It means i can't get help with my problem regarding bd rebuilder?

[jdobbs]

Originally Posted by lauguru

jdobbs

TWEAK_PASS_ONE=--opencl
TWEAK_PASS_TWO=--opencl

is normal in the first pass OpenCL work properly, and the 2nd pass not see it working?

that could wrong? or command must be added to the 2 pass?

I think you are mistaken. They both work. I tested it after your original post. You should be able to open the file LASTCMD.TXT in the installation folder and see the actual command line used for encoding.

[jdobbs]

Originally Posted by Valdy

Sorry i wasn't aware of this. I edited it out.

It means i can't get help with my problem regarding bd rebuilder?

Sorry, but I only support bug reports that are against original BDs. It's almost impossible to debug an issue that is the result of preprocessing. I have no idea whether the source is good. In my experience I have found that most issues (actually almost all) reported on preprocessed sources are the result of the preprocessing rather than a bug in BD-RB.

[jdobbs]

@ tiamat911

I just did a DVD-5 conversion from BD using a test disc -- and it worked correctly. I don't have "James and the Giant Peach" -- so I'll do another test against "Silver Linings Playbook". But so far it seems everything is executing as it should.

You may want to try removing BD-RB, AVISYNTH, HAALI, and FFDSHOW and reinstall them all from scratch.