Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Video Encoding > MPEG-4 ASP

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 6th October 2020, 07:56   #1  |  Link
Selur
Registered User
 
Selur's Avatar
 
Join Date: Oct 2001
Location: Germany
Posts: 6,239
xvid_encraw how to use pipe input?

Looking at 'xvid_encraw -help':
Code:
xvid_encraw - raw mpeg4 bitstream encoder written by Christoph Lampert

xvid_encraw built at 20:58:26 on Apr  9 2020
Usage : xvid_encraw [OPTIONS]

Input options:
 -i      string  : input filename (stdin)
 -type   integer : input data type (yuv=0, pgm=1, avi/avs=2) (0)
 -w      integer : frame width ([1.4096])
 -h      integer : frame height ([1.4096])
 -csp    string  : colorspace of raw input file i420, yv12 (default)
 -frames integer : number of frames to encode (all)

Output options:
 -dump           : save decoder output
 -save           : save an Elementary Stream file per frame
 -o      string  : save an Elementary Stream for the complete sequence
 -avi    string  : save an AVI file for the complete sequence

Rate control options:
 -framerate        float      : target framerate (auto)
 -bitrate          [integer]  : target bitrate in kbps (700)
 -size             integer    : target size in kilobytes
 -single                      : single pass mode (default)
 -cq               float      : single pass constant quantizer
 -pass1            [filename] : twopass mode (first pass)
 -full1pass                   : perform full quality first pass (disabled)
 -pass2            [filename] : twopass mode (2nd pass)
 -max_key_interval integer    : maximum keyframe interval (300)
 -zones            [zones]    : use `-help zones' for usage guidelines
 -zq     starting_frame float : bitrate zone; quant
 -zw     starting_frame float : bitrate zone; weight

Single Pass options:
 -reaction         integer    : reaction delay factor (16)
 -averaging        integer    : averaging period (100)
 -smoother         integer    : smoothing buffer (100)

Second Pass options:
 -kboost           integer    : I frame boost (10)
 -kthresh          integer    : I frame reduction threshold (1)
 -kreduction       integer    : I frame reduction amount (20)
 -ostrength        integer    : overflow control strength (5)
 -oimprove         integer    : max overflow improvement (5)
 -odegrade         integer    : max overflow degradation (5)
 -chigh            integer    : high bitrate scenes degradation (0)
 -clow             integer    : low bitrate scenes improvement (0)
 -overhead         integer    : container frame overhead (0)
 -vbvsize          integer    : use vbv buffer size
 -vbvmax           integer    : vbv max bitrate
 -vbvpeak          integer    : vbv peak bitrate over 1 second

BFrames options:
 -max_bframes      integer    : max bframes (2)
 -bquant_ratio     integer    : bframe quantizer ratio (150)
 -bquant_offset    integer    : bframe quantizer offset (100)

Other options
 -noasm                       : do not use assembly optimized code (use)
 -turbo                       : use turbo presets for higher encoding speed (don't use)
 -quality          integer    : quality ([0..6]) (6)
 -vhqmode          integer    : level of R-D optimizations ([0..4]) (1)
 -bvhq                        : use R-D optimizations for B-frames (don't use)
 -metric           integer    : distortion metric for R-D opt (PSNR:0, PSNRHVSM:1) (0)
 -qpel                        : use quarter pixel ME (don't use)
 -gmc                         : use global motion compensation (don't use)
 -qtype            integer    : quantization type (H263:0, MPEG4:1) (0)
 -qmatrix          filename   : use custom MPEG4 quantization matrix
 -interlaced       [integer]  : interlaced encoding (BFF:1, TFF:2) (1)
 -nopacked                    : disable packed B-frames mode (enabled)
 -noclosed_gop                : disable closed GOP mode (enabled)
 -masking          [integer]  : HVS masking mode (None:0, Lumi:1, Variance:2) (0)
 -stats                       : print stats about encoded frames (don't print)
 -ssim             [integer]  : print ssim for every frame (accurate: 0 fast: 4) (2)
 -ssim_file        filename   : output the ssim stats into a file
 -psnrhvsm                    : print PSNRHVSM metric for every frame (don't print)
 -debug            integer    : activate xvidcore internal debugging output (don't activate)
 -vop_debug                   : print some info directly into encoded frames (don't print)
 -nochromame                  : disable chroma motion estimation (enabled)
 -notrellis                   : disable trellis quantization (enabled)
 -imin             integer    : minimum I Quantizer (1..31) (2)
 -imax             integer    : maximum I quantizer (1..31) (31)
 -bmin             integer    : minimum B Quantizer (1..31) (2)
 -bmax             integer    : maximum B quantizer (1..31) (31)
 -pmin             integer    : minimum P Quantizer (1..31) (2)
 -pmax             integer    : maximum P quantizer (1..31) (31)
 -drop             integer    : frame Drop Ratio (0..100) (0)
 -start            integer    : starting frame number (0)
 -threads          integer    : number of threads (auto)
 -slices           integer    : number of slices (1)
 -progress         [integer]  : show progress updates every n frames (10)
 -par       integer[:integer] : set Pixel Aspect Ratio (1)
                                1 = 1:1
                                2 = 12:11 (4:3 PAL)
                                3 = 10:11 (4:3 NTSC)
                                4 = 16:11 (16:9 PAL)
                                5 = 40:33 (16:9 NTSC)
                            other = custom (width:height)
 -help                        : print this help message

NB: You can define up to 8192 zones via both the -zones and the -z[qw] options as needed.
I assumed:
Code:
"I:\Hybrid\64bit\ffmpeg.exe" -y -loglevel fatal -i "F:\TestClips&Co\files\test.avi" -map 0:0 -an -sn -pix_fmt yuv420p -f rawvideo - | "I:\Hybrid\64bit\xvid_encraw.exe" -cq 3 -w 640 -h 352 -csp i420 -framerate 25 -o "E:\Temp\test.m4v"
should work, but it only gives me:
Code:
xvid_encraw - raw mpeg4 bitstream encoder written by Christoph Lampert

xvidcore build version: xvid-1.3.7
Bitstream version: 1.3.7
Detected CPU flags: ASM MMX MMXEXT SSE SSE2 SSE3 SSE41 TSC
Detected 16 cpus, using 16 threads.
   -1: key=0, time=      0, len=      -5 | type=I, quant=  0, len=       0

Tot: enctime(ms) =   0.00,               length(bytes) =       0
Avg: enctime(ms) =  -1.00, fps =-1000.00, length(bytes) =      -1
N frames:      1 frames, size =       0/      0
as output.
The ffmpeg decoding part works fine. (saving to a file instead of piping properly saves yuv data)
I tried '-csp yv12', which didn't help.
I tried adding '-type 0', which didn't help.
I tried adding '-i stdin' or '-i -' but those aborted with 'Error opening input file stdin' and 'Error opening input file -'.

=> Does anyone know how to use xvid_encraw with pipe input?

Cu Selur

Ps.: I know when doing no filtering and the input is avi, directly using xvid_encraw might work, but I'd like to use vspipe and ffmpeg to pipe content to xvid_encraw.
__________________
Hybrid here in the forum, homepage
Notice: Since email notifications do not work here any more, it might take me quite some time to notice a reply to a thread,..
Selur is offline   Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 15:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.