BD Rebuilder Beta - Bug Reports Only

[jdobbs]

Originally Posted by Capsbackup

I have had Blu-rays that I have been unable to blank warnings before when backing up to BD5/9 since they do not show up for blanking. They are usually very small files, less than 1 MB. This would explain why.
I prefer to blank any and all of these small files that make up the various warnings, adverts, etc... with BD-RB. However, for the ones that I was not able to because they are not listed, I end up using multiAVCHD. It would be a bonus to eliminate that extra step and only use BD-RB!

I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

[Capsbackup]

Originally Posted by jdobbs

I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

Excellent!!

[mscsmyrpln]

Originally Posted by jdobbs

I've modified it for the next release so that any MIN_M2TS_SIZE value that is less than the default for BD-5/9 will cause it to be lowered as well. So setting it to zero would list everything no matter what target size is selected.

Does this mean Custom Size targets will also respond to MIN_M2TS_SIZE values < 10?

Thank you.

[jdobbs]

Originally Posted by mscsmyrpln

Does this mean Custom Size targets will also respond to MIN_M2TS_SIZE values < 10?

Thank you.

I assume you mean less than 10MB. The answer is yes.

[Sharc]

Originally Posted by jdobbs

Not yet. I'm still constrained by other work. I looked at it quickly and didn't find anything. I'll work on it for the next release.

Just curious: did you find anything?

[cyberdoggy]

Can someone clue me in please, this just started happening and I have no idea why it will not work with any movie all of a sudden. Running Windows 7 x64. If everything is ok why does it stop?

18:03:45] PHASE ONE, Encoding
- [18:03:45] Processing: VID_00009 (1 of 1)
- [18:03:45] Extracting A/V streams [VID_00009]
- [18:25:18] Reencoding video [VID_00009]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 176,281 frames
- Bitrate: 4,027 Kbs
- [18:25:18] Reencoding: VID_00009, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[18:25:22] - Failed video encode, aborted

[Capsbackup]

@cyberdoggy;
Probably another program update has changed your ffdshow settings or has taken priority, even though "Inspect" says Ok.
Uninstall ffdshow, haali and avisynth. Reboot. Install those programs again.
All should be well again.

[cyberdoggy]

Originally Posted by Capsbackup

@cyberdoggy;
Probably another program update has changed your ffdshow settings or has taken priority, even though "Inspect" says Ok.
Uninstall ffdshow, haali and avisynth. Reboot. Install those programs again.
All should be well again.

Believe it or not I reinstalled my whole operating system thinking that, and then just installed BD Rebuilder step by step with the directions at the top of this thread, even installed the software directly downloaded from the links on the thread. Basically all that is isntalled is BD Rebuilder so that cannot be the issue. I even right clicked and started the app from admin and let BD setup correctly, So I am completely lost now...

[Chuckwagon]

Originally Posted by cyberdoggy

Believe it or not I reinstalled my whole operating system thinking that, and then just installed BD Rebuilder step by step with the directions at the top of this thread, even installed the software directly downloaded from the links on the thread. Basically all that is isntalled is BD Rebuilder so that cannot be the issue. I even right clicked and started the app from admin and let BD setup correctly, So I am completely lost now...

Are you overclocked in any way? Are you using any hidden options in BD, such as the multi-process feature, or is it totally default? What is your source, disc, image, etc.?

Don't know if any of those will make a difference, but it's worth asking.

[cyberdoggy]

Originally Posted by Chuckwagon

Are you overclocked in any way? Are you using any hidden options in BD, such as the multi-process feature, or is it totally default? What is your source, disc, image, etc.?

Don't know if any of those will make a difference, but it's worth asking.

It seems to be happening on any disk and everything is stock factory settings, no overclocking and i'm using Movie only mode DVD5 setting. As far as hidden settings I never even go to that section and change anything I leave it as it is when I install it.

[RobertM]

i'm using Movie only mode DVD5 setting

Does the same thing happen if you select BD-25?

[cyberdoggy]

Originally Posted by RobertM

Does the same thing happen if you select BD-25?

Did this when I tried BD25...

- Input BD size: 34.12 GB
- Approximate total content: [02:02:32.386]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:59:13] PHASE ONE, Encoding
- [16:59:13] Processing: VID_00009 (1 of 1)
- [16:59:13] Extracting A/V streams [VID_00009]
- [17:17:49] Reencoding video [VID_00009]
- [17:17:49] Keeping original video (no reencode)
- [17:17:49] Processing audio tracks
- Track 4352 (eng): Keeping original audio
[17:17:49]PHASE ONE complete
[17:17:49]PHASE TWO - Rebuild Started
- [17:17:49] Rebuilding BD file Structure
- Failed in attempt to multiplex: MUX_MOVIE_ONLY.meta
- Pes packet len too large ( >100Mb). Bad stream or invalid codec speciffed.
[17:17:56] - Failed to REBUILD

[jdobbs]

Please don't edit the logs before posting. All that header information is there so it can help find issues...

[cyberdoggy]

Originally Posted by jdobbs

Please don't edit the logs before posting. All that header information is there so it can help find issues...

Full Log...

----------------------
[07/30/12] BD Rebuilder v0.40.11 (beta)
[19:54:01] Source: INDIANA_JONES_4_D1
- Input BD size: 34.12 GB
- Approximate total content: [02:02:32.386]
- Target BD size: 4.36 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Auto Quality: High Quality (Default), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[19:54:03] PHASE ONE, Encoding
- [19:54:03] Processing: VID_00009 (1 of 1)
- [19:54:03] Extracting A/V streams [VID_00009]
- [20:25:11] Reencoding video [VID_00009]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 176,281 frames
- Bitrate: 4,027 Kbs
- [20:25:11] Reencoding: VID_00009, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.40.11 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[20:25:13] - Failed video encode, aborted

[busch42]

cyberdoggy, I had the same problem, After about a month I realized it was my computer overheating, Try installing HDMonitor and see what your temps are.

[jdobbs]

I've updated the first post of this thread with a link to the latest release of BD-RB (v0.41.01). Changes for this release:

- Fixed a fatal error that can occur when MULTIPROCESS
  is used in conjunction with sources that include
  secondary streams.
- Corrected an issue in which very small segments of
  a multi-part source could unnecessarily prompt with
  annoying "oversize" warnings.
- Added chapter support for MP4 ALTERNATE output.  It
  is enabled by default.  To disable MP4 chapters, set 
  add the new hidden option MP4_CHAPTERS=0.
- Added some additional features to the ALTERNATE
  output and type definition modules.
- Modified processing of MIN_M2TS_SIZE (hidden value)
  so that it also affects BD-5/9 (as long as it is
  smaller than the BD-5/9 default).
- Corrected issues in which some important values were
  not being maintained when saving and loading from a
  project file (File Menu).
- Added the MPLS (playlist) number to the title section 
  of the stream list when MOVIE-ONLY mode is selected.  
  This is to avoid confusion as to which playlist is 
  active at any point in time.  The playlist number
  is also now displayed as a part of the batch list.
- Corrected a problem in which, under certain unusual
  conditions on a 7.1 source -- the wrong channels 
  might be used for the rear speakers when converting
  to AC3.

[soneca]

BD Rebuilder v0.41.01 (beta)

Thank you!

[Wizzu]

Originally Posted by jdobbs

latest release of BD-RB (v0.41.01).

Thanks jdobbs

[AmigaFuture]

Hi. When I have BD-RB reencoded with Full Backup and Quicker encode for Extras it plays fine with PowerDVD 12 and my LG Player. When reencoded with Movie and Menus (Auto blank extras) but uncheck blank for extras I want kept and Quicker encode on, the log shows everything went well but PowerDVD 12 seems to get stuck (in a loop?) and doesn't shows anything from the hard drive location after it flashes the "Touchstone" logo, however my LG player will play.

Something to consider.

[08/02/12] BD Rebuilder v0.41.01 (beta)
[22:29:29] Source:  DEAD_POETS_SOCIETY
  - Input BD size: 29.33 GB
  - Approximate total content: [03:14:59.070]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7601]
  - MOVIE and MENUS mode enabled
  - Quality: High-Speed Option (BD-25), Two Pass
  - Decoding/Frame serving: DirectShow [4-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[22:29:30] PHASE ONE, Encoding
 - [22:29:30] Blanking: VID_00024 (1 of 23)
 - [22:29:30] Blanking: VID_00043 (2 of 23)
 - [22:29:30] Blanking: VID_00030 (3 of 23)
 - [22:29:30] Blanking: VID_00042 (4 of 23)
 - [22:29:30] Blanking: VID_00063 (5 of 23)
 - [22:29:30] Blanking: VID_00029 (6 of 23)
 - [22:29:30] Blanking: VID_00215 (7 of 23)
 - [22:29:31] Blanking: VID_00062 (8 of 23)
 - [22:29:31] Blanking: VID_00025 (9 of 23)
 - [22:29:31] Blanking: VID_00061 (10 of 23)
 - [22:29:31] Blanking: VID_00014 (11 of 23)
 - [22:29:31] Blanking: VID_00035 (12 of 23)
 - [22:29:31] Blanking: VID_00032 (13 of 23)
 - [22:29:31] Blanking: VID_00034 (14 of 23)
 - [22:29:31] Blanking: VID_00033 (15 of 23)
 - [22:29:31] Blanking: VID_00031 (16 of 23)
 - [22:29:31] Blanking: VID_00006 (17 of 23)
 - [22:29:31] Processing: VID_00004 (18 of 23)
 - [22:29:31] Extracting A/V streams [VID_00004]
 - [22:29:36] Reencoding video [VID_00004]
   - Source Video: MPEG-4 (AVC), 720x480
   - Rate/Length: 29.970fps, 4,991 frames
 - [22:29:36] Reencoding: VID_00004, Pass 1 of 1
 - [22:29:50] Video Encode complete
 - [22:29:50] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:29:50] Multiplexing M2TS
 - [22:29:55] Processing: VID_00001 (19 of 23)
 - [22:29:55] Extracting A/V streams [VID_00001]
 - [22:30:07] Reencoding video [VID_00001]
   - Source Video: MPEG-4 (AVC), 720x480
   - Rate/Length: 29.970fps, 14,320 frames
 - [22:30:07] Reencoding: VID_00001, Pass 1 of 1
 - [22:30:42] Video Encode complete
 - [22:30:42] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:30:42] Multiplexing M2TS
 - [22:30:49] Processing: VID_00002 (20 of 23)
 - [22:30:49] Extracting A/V streams [VID_00002]
 - [22:31:02] Reencoding video [VID_00002]
   - Source Video: MPEG-4 (AVC), 720x480
   - Rate/Length: 29.970fps, 19,756 frames
 - [22:31:02] Reencoding: VID_00002, Pass 1 of 1
 - [22:31:47] Video Encode complete
 - [22:31:47] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:31:47] Multiplexing M2TS
 - [22:31:54] Processing: VID_00003 (21 of 23)
 - [22:31:54] Extracting A/V streams [VID_00003]
 - [22:32:21] Reencoding video [VID_00003]
   - Source Video: MPEG-4 (AVC), 720x480
   - Rate/Length: 29.970fps, 26,611 frames
 - [22:32:21] Reencoding: VID_00003, Pass 1 of 1
 - [22:34:04] Video Encode complete
 - [22:34:04] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:34:04] Multiplexing M2TS
 - [22:34:13] Processing: VID_00005 (22 of 23)
 - [22:34:13] Extracting A/V streams [VID_00005]
 - [22:34:54] Reencoding video [VID_00005]
   - Source Video: MPEG-4 (AVC), 720x480
   - Rate/Length: 29.970fps, 48,421 frames
 - [22:34:54] Reencoding: VID_00005, Pass 1 of 1
 - [22:37:38] Video Encode complete
 - [22:37:38] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:37:38] Multiplexing M2TS
 - [22:37:51] Processing: VID_00000 (23 of 23)
 - [22:37:51] Extracting A/V streams [VID_00000]
 - [22:49:38] Reencoding video [VID_00000]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 185,195 frames
   - Bitrate: 21,589 Kbs
 - [22:49:38] Reencoding: VID_00000, Pass 1 of 2
 - [22:59:10] Reencoding: VID_00000, Pass 2 of 2
 - [23:55:44] Video Encode complete
 - [23:55:44] Processing audio tracks
   - Track 4353 (eng): Keeping original audio
   - Track 4354 (eng): Reencoding audio to AC3...
 - [23:59:13] Multiplexing M2TS
[00:12:02]PHASE ONE complete
[00:12:02]PHASE TWO - Rebuild Started
 - [00:12:02] Rebuilding BD file Structure
[00:12:09] - Encode and Rebuild complete
[00:12:09] JOB: DEAD_POETS_SOCIETY finished.

[jdobbs]

Unfortunately "Movie and Menus" is still experimental -- at best it is a "good guess" right now. If there's JAVA in play it could be even more hit-or-miss.