BD Rebuilder Beta - Bug Reports Only

[RoyGBiv-inRI]

I recently did a fresh install of Win10. I installed AviSynth and LAV filters, but now I get the following error with BDRebuilder. After it re-encodes it stops at the point where it is trying to rebuild the BD file structure. I get the error message:

BD Rebuilder experienced an error 1200 14:04:34
Copydirstructure () 00076 1200

Here is the associated log:

[01/24/23] BD Rebuilder v0.61.21
[12:13:07] Source: S4D1
- Input BD size: 38.80 GB
- Approximate total content: [02:55:46.235]
- Target BD size: 22.95 GB
- Windows Version: 6.2 [9200]
- Quality: High Quality (Default), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:13:07] PHASE ONE, Encoding
- [12:13:07] Processing: VID_00012 (1 of 4)
- [12:13:07] Extracting A/V streams [VID_00012]
- [12:17:14] Reencoding video [VID_00012]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 82,777 frames
- Bitrate: 14,862 Kbs
- [12:17:14] Reencoding: VID_00012, Pass 1 of 1
- [12:48:17] Video Encode complete
- [12:48:17] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:48:17] Multiplexing M2TS
- [12:49:26] Processing: VID_00013 (2 of 4)
- [12:49:26] Extracting A/V streams [VID_00013]
- [12:53:33] Reencoding video [VID_00013]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 78,000 frames
- Bitrate: 15,683 Kbs
- [12:53:33] Reencoding: VID_00013, Pass 1 of 1
- [13:24:14] Video Encode complete
- [13:24:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [13:24:14] Multiplexing M2TS
- [13:25:24] Processing: VID_00021 (3 of 4)
- [13:25:24] Extracting A/V streams [VID_00021]
- [13:25:31] Reencoding video [VID_00021]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,876 frames
- Bitrate: 2,187 Kbs
- [13:25:31] Reencoding: VID_00021, Pass 1 of 1
- [13:25:56] Video Encode complete
- [13:25:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [13:25:56] Multiplexing M2TS
- [13:26:00] Processing: VID_00031 (4 of 4)
- [13:26:00] Extracting A/V streams [VID_00031]
- [13:30:19] Reencoding video [VID_00031]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 83,137 frames
- Bitrate: 15,834 Kbs
- [13:30:19] Reencoding: VID_00031, Pass 1 of 1
- [14:03:11] Video Encode complete
- [14:03:11] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:03:11] Multiplexing M2TS
[14:04:34]PHASE ONE complete
[14:04:34]PHASE TWO - Rebuild Started
- [14:04:34] Rebuilding BD file Structure
- [14:04:34] CopyDirStructure() 00076 1200

I'm sure I'm just doing something stupid, but can someone help with this problem. I've tried uninstalling and re installing AviSynth and LAV filters. The first time I used BDRebuilder I did run it as administrator and it gave me the usual message about configuring the filters.

I don't know what else to try.

Thanks for any help.

Your Obedient Servant
SMK

[Emulgator]

BD-RB 0.61.21? BD-RB is at 0.61.28 atm, maybe you want to try the recent one first.

[RoyGBiv-inRI]

Actually, I've tried three different versions; 19, 21, and 28. The same thing happens with all 3, but I just happened to post the log from 21.

Your Obedient Servant
SMK

[RoyGBiv-inRI]

Doing a search I found some posts from a few years ago with the same problem. That individual seemed to have resolution by changing to the "required" versions of AVISynth and LAV filters. I had been using those versions, but just to be sure I downloaded them again as well as a new copy of BDRB 21 zip file. I uninstalled AVISynth and LAV filters and reinstalled the newly downloaded versions from the first page and then extracted a new version of BDRB 21. The problem is still exactly the same.

In those earlier posts JDobbs referred to a possible issue with where the files were located or that the file names were too long. I have no idea what files he meant or where these files are located, but I can tell you that everything was installed onto its default folders. I also have done this exact setup a few times before with Win10 and have had no problems.

Your Obedient Servant
SMK

[nil]

Hi. I posted this two weeks ago, unsure of whether to post it in this thread or not; I've not had any responses there, so here we go...

Short version: when reencoding to AAC audio, BD Rebuilder generates a temporary file called audio1.bat which runs faac.exe. This fails for me, because it includes the command line option -br 384000, when the online documentation and command-line help say the option should be -b 384.

What I don't understand is how it used to work fine for me; I had assumed I must have changed something on my PC (broken by a Windows update or something), but I'm running BD Rebuilder's faac.exe (which hasn't changed in a while anyway), and that option is definitely wrong. Utterly confused.

Full details in the other thread.

Many thanks for your help.

[RoyGBiv-inRI]

I don't know where JDobbs and the others who usually are in this thread are, but here is an interesting update. If I set BDRB to put the finished product on a different drive, it works fine. It doesn't matter which drive or how long the path is to that drive, but it works. OTOH, any time I try to put the finished product in the same drive the original files are in, no matter what folder, I get the above error message.

Strange, but since I have a work around, I can at least use BDRB.

Your Obedient Servant
SMK

[Emulgator]

Drive full ?

[Mike-uk]

@jdobbs

Originally Posted by nil

Hi. I posted this two weeks ago, unsure of whether to post it in this thread or not; I've not had any responses there, so here we go...

no solution but ive the same problem

"C:\Users\xxx\Desktop\BD_Rebuilder\tools\wavi.exe" "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AVS" - | "C:\Users\xxx\Desktop\BD_Rebuilder\tools\faac.exe" - -br 128000 -o "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AAC"


- [17:45:29] Reencoding: VID_00000, Pass 1 of 1
- [17:45:35] Video Encode complete
- [17:45:35] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AAC...
[17:47:45] - Failed to reencode audio, aborted

[AmigaFuture]

Hello.

I've been going through some of my older BD rips and making MKVs. I've noticed some Movie & Menus processed BDs won't allow making an MKV. Star Wars - 1, 2, and 3 for example. So I got out my discs..and I reripped them. MKVs can by made from the fresh rip without a problem as long as they aren't processed by BD-RB. My logs..

[01/29/23] BD Rebuilder v0.61.28
[12:54:40] Source:  ATTACK_OF_THE_CLONES_O
  - Input BD size: 45.55 GB
  - Approximate total content: [02:51:24.606]
  - Target BD size: 46.26 GB
  - Windows Version: 6.2 [9200]
  - MOVIE and MENUS mode enabled
  - Quality: High Quality (Default), Two Pass
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:54:40] PHASE ONE, Encoding
 - [12:54:40] Blanking: VID_00050 (1 of 73)
 - [12:54:40] Blanking: VID_00190 (2 of 73)
 - [12:54:40] Blanking: VID_00101 (3 of 73)
[...Snip...]
- [12:56:23] Processing: VID_00882 (72 of 73)
 - [12:56:23] Extracting A/V streams [VID_00882]
 - [12:56:30] Reencoding video [VID_00882]
 - [12:56:30] Keeping original video (no reencode)
 - [12:56:30] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [12:56:30] Multiplexing M2TS
 - [12:56:36] Processing: VID_00800 (73 of 73)
 - [12:56:36] Extracting A/V streams [VID_00800]
 - [12:59:56] Reencoding video [VID_00800]
 - [12:59:56] Keeping original video (no reencode)
 - [12:59:56] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [12:59:56] Multiplexing M2TS
[13:02:53]PHASE ONE complete
[13:02:53]PHASE TWO - Rebuild Started
 - [13:02:53] Rebuilding BD file Structure
[13:02:56] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:02:59] JOB: ATTACK_OF_THE_CLONES_O finished.

Make MKV from processed..

[01/29/23] BD Rebuilder v0.61.28
[13:08:09] Source:  ATTACK_OF_THE_CLONES_O_00800
  - Input BD size: 32.70 GB
  - Approximate total content: [02:22:27.872]
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV, Intact Video, Intact Audio
  - Quality: High Quality (Default)
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:08:09] PHASE ONE, Encoding
 - [13:08:09] Processing: VID_00882 (1 of 2)
 - [13:08:09] Extracting A/V streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
   - Extracting video streams [VID_00882]
   - Extracting audio/subtitle streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
   - Extracting audio streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
 - Error in attempt to extract audio.
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
[13:09:09] - Failed to retrieve audio, aborted

Make MKV from fresh rip and not processed..

[01/29/23] BD Rebuilder v0.61.28
[13:11:28] Source:  ATTACK_OF_THE_CLONES_O_00800
  - Input BD size: 40.29 GB
  - Approximate total content: [02:22:27.872]
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV, Intact Video, Intact Audio
  - Quality: High Quality (Default)
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:11:29] PHASE ONE, Encoding
 - [13:11:29] Processing: VID_00882 (1 of 2)
 - [13:11:29] Extracting A/V streams [VID_00882]
 - [13:13:29] Reencoding video [VID_00882]
 - [13:13:29] Keeping original video (no reencode)
 - [13:13:29] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [13:13:29] Processing: VID_00800 (2 of 2)
 - [13:13:29] Extracting A/V streams [VID_00800]
 - [13:16:35] Reencoding video [VID_00800]
 - [13:16:35] Keeping original video (no reencode)
[13:16:35]PHASE ONE complete
[13:16:35]PHASE TWO - Rebuild Started
 - [13:16:35] Building ALTERNATE OUTPUT Structure
[13:25:57] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:25:57] JOB: ATTACK_OF_THE_CLONES_O finished.

[MrVideo]

You might need to replace the BDRB supplied tsmuxer with a newer snapshot. Yes, it might mean having to do some other workarounds, but it should handle the audio. Worth a try.

[tebasuna51]

Originally Posted by Mike-uk

no solution but ive the same problem

"C:\Users\xxx\Desktop\BD_Rebuilder\tools\wavi.exe" "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AVS" - | "C:\Users\xxx\Desktop\BD_Rebuilder\tools\faac.exe" - -br 128000 -o "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AAC"

Of course the faac syntax is -b 128 (instead -br 128000) with a max of 500 (kb) for a stereo input.

BTW the faac encoder is not recommended, use qaac or fdkaac with better quality and until 7.1 audio. Also ffmpeg (v3 or higher) until 5.1 audio.

[AmigaFuture]

Originally Posted by MrVideo

You might need to replace the BDRB supplied tsmuxer with a newer snapshot. Yes, it might mean having to do some other workarounds, but it should handle the audio. Worth a try.

I'm cool with workarounds. I noticed that if I disable the AC-3's and keep DTS..an MKV will be made okay. Then do it again in reverse, disable DTS and keep AC-3's..then put them together. There are other ways, also. I went checking for a newer TsMUXER..but then I got sidetracked by having to do some other stuff not computer related. I'll have another look.

[AmigaFuture]

Nope, the new TsMuxer is the problem. I got it and the GUI archive. It has the same error.

[MrVideo]

Weird that there is an issue with the processed files. If directly going to a MKV file works, why not just use it?

[nil]

Originally Posted by tebasuna51

Of course the faac syntax is -b 128 (instead -br 128000) with a max of 500 (kb) for a stereo input.

BTW the faac encoder is not recommended, use qaac or fdkaac with better quality and until 7.1 audio. Also ffmpeg (v3 or higher) until 5.1 audio.

Ah... you may have just provided a clue to my problem. I rebuilt ffmpeg a while ago, and this may match with when my problems started. It may be BDRebuilder was using ffmpeg/fdkaac, I broke it, and it's using faac instead.

So two things, then:

1) How do I persuade BD Rebuilder to use ffmpeg/fdkaac again? It's there, on the path, and functional. Or do I need to build a specific exe or dll?

2) When BD Rebuilder uses faac.exe instead, looks like there's a bug with the command-line options it spits out in audio1.bat. (But possibly no-one notices because no-one uses faac if they can help it)

Cheers

[AmigaFuture]

Originally Posted by MrVideo

Weird that there is an issue with the processed files. If directly going to a MKV file works, why not just use it?

There isn't a problem from Source. It's BD-RB Backup...

[MrVideo]

Originally Posted by AmigaFuture

There isn't a problem from Source. It's BD-RB Backup...

I think you may have misunderstood my response. If I read your original posting correctly, if you used the BDRB processed files from the source, the result is a failure. But, if you made the MKV from the source, then all is well. So, why not just skip the BDRB processed files and just use BDRB to make the MKV directly from the source?

[Mark_Venture]

Originally Posted by cartman0208

https://github.com/rigaya/NVEnc/blob..._Options.en.md
Maybe you want to check yourself?

Can you just replace the NVEncC used with NVENCCRE from git? any reason to, or not to? (I mean other than not being tested with NVENCCRE?)

I've been extremely happy so far with NVENCCRE, its ease of use and its output, so I don't want to mess with it. I'm more just curious.

[Emulgator]

I would expect incompatibility only if parameters that matched once
are changed (added, deleted, renamed, ranged differently)

[jdobbs]

Originally Posted by Emulgator

I would expect incompatibility only if parameters that matched once
are changed (added, deleted, renamed, ranged differently)

Exactly. Unfortunately I haven't been keeping up with changes -- so I can't say whether there are any that might create an incompatibility.